How to assemble a computer chair

Such a piece of furniture is a convenient option for a student or a working person. Thanks to the soft seat and back, the load on the spine is significantly reduced. The presence of rollers eliminates the need to constantly get out of the chair to take documents or something necessary from the next table. Instructions are not always supplied with the chair, especially if you purchase a used product. Let's try to figure out how to assemble a computer chair quickly and easily.

What is needed

To get started, open the box with the product and put all the contents on the table. First of all, you will need to familiarize yourself with the manufacturer's recommendations for assembly, if any. Check for completeness, all necessary parts and elements should already be included.

IMPORTANT. The manufacturer of the ordinary supplies a special assembly key. It has a hexagon head.

The product consists of 2 main parts:

  • Directly sitting with the backrest, you have the ability to adjust it. It can be a one-piece solution with or without armrests. Most often, the back is made as a separate element.
  • The supporting part, which provides an adjustable mechanism for changing the height. It is executed on roller wheels.

REFERENCE. If you were unable to find the assembly instructions in the kit, you can search for it on the Internet.

Assembling a computer chair - step by step instructions

To begin with, it is worth saying that the assembly process is a simple task. You will certainly deal with it quickly. The main thing is to follow the step-by-step instructions below:

  • Mounting the roller jacks. Insert the wheels into the corresponding holes on the legs. It takes a little effort. First of all, the rollers should be installed in the crosspiece. They are inserted with rods into the holes on the bottom surface, after which it is necessary to gently, but press firmly until they click. To complete this stage, you can use some kind of subject, do not overdo it.
  • Seat preparation. It will be necessary to fix the regulating mechanism at the back of the seat, and the piastra is attached to the bottom.

NOTE. Each screw must be fastened with two types of washers.

  • Install the gas lift in the crosspiece. It is necessary to remove the caps from the edges of the gas lift and then perform this action. In order to assemble the casing, it will be necessary to assemble from several parts, a collection is provided on the principle of a telescopic pipe. Insert the assembled element into the hole of the crosspiece, which is located in the middle. The bearing part is assembled.

REFERENCE. Many people think that the assembly process of such a design is a very difficult task. This is actually not the case. If you arm yourself with some tool and study the information provided or use the instructions, you will certainly succeed.

Connect the two parts of the chair together. Put the seat on the shock absorber. After that, you need to strongly press on the seat or just sit on it. This action is important, because you can achieve the most durable fixation.

At the end of the described manipulations, it is necessary to conduct quality control of the assembly. To do this, it is necessary to press the piastra lever from above, lowering the structure should follow. When lifting the lever up, the structure must also rise, return to its original position. If everything functions exactly as described, then the design is assembled correctly.

Assembly adjustment

If you notice that the construction you have assembled is not very convenient or loose, it means that you did something wrong. In this case, it is recommended to check the correct implementation of each of the assembly steps. Adjust the assembled structure. Consider the main malfunctions that you may encounter during improper assembly:

  • The backrest adjustment does not work, you cannot fix it in the desired position. In this case, it is necessary to carefully inspect the screw, perhaps you did not fully fasten the thread or completely break it. In the second case, you can’t do without replacement.
  • With backlash, it is necessary to check the place of permanent attachment to the back.

IMPORTANT. After you bring the new design into a warm room, you must wait at least 12 hours. Otherwise, the pneumatic cartridge can fail and you can’t do without its replacement.

Watch the video: Office Chair Assembly 048-GM-48102 (March 2024).

Leave Your Comment