How to paint tiles on the floor

The most popular wall and floor coverings in the bathroom and kitchen are tiles. Its popularity is due to its strength, durability, high hygienic characteristics, ease of cleaning, moisture resistance. But sometimes I want to update the look of the room. To do this, it is not necessary to change the tile to a new one. An option for painting it is available. In addition, it will not be so financially expensive when updating the interior.

Can tiles be painted on the floor

It is possible to apply a paint and varnish covering over a ceramic tile both on walls, and on a floor.

IMPORTANT. When coating ceramic floor tiles with paint, it is important to consider its quality and suitability specifically for the floor. This is due to the fact that it is subject to high mechanical stresses. And if you use the wrong paint, then it will quickly be erased and a coating update will be required.

The best options to cover the tiles are:

  1. Epoxy. The basis for it is epoxy resin, which forms a dense, wear-resistant coating that is not afraid of water.
  2. Oily. They create a solid surface. No additional coverage is required.IMPORTANT. The applied paint must be allowed to dry thoroughly before use.
  3. Latex can also be used for such work.

REFERENCE: When buying paint for tiles, you should study the inscription on the packaging label. It should be written where, when and under what operating conditions this composition can be used. Naturally, it is worth buying only those that will meet specific requirements.

How to paint floor tiles

To start painting the floor on which the tiles lie, you need to acquire:

  1. Directly suitable composition.
  2. With a primer, choose mainly with an epoxy base. Primers should be applied to the tiles to provide better adhesion between surfaces.
  3. Take sandpaper with fine grain.
  4. Paint roller or brush.
  5. Plastic trays for painting.
  6. Cattle for painting. With it, you can protect the surface.
  7. Varnish, if necessary, apply such a layer.

The sequence of painting:

  1. Clear the surface completely. What is impossible to bear must be carefully wrapped in cellophane to protect it from getting dirty.
  2. Clean the floor, removing all dirt and dust.
  3. Degrease with any solvents. You can use vinegar or alcohol.
  4. After that, sandpaper carefully walk over the surface.
  5. Make sure the integrity of the floor. Otherwise, dismantling or repair is required.
  6. Skirting the plinth with masking tape.
  7. Once again, the floors are thoroughly washed, to eliminate small debris, for example, from sanding.
  8. To apply soil on a tile surface.
  9. Proceed with painting.

REFERENCE: All work, especially preparatory, must be carried out in the most thorough manner, as this will allow the composition to serve as long as possible.

In addition to simple plain coloring of the surface, you can give free rein to imagination and apply any pattern, for example, geometric.

Watch the video: How to Paint Tile Floors with a Stencil (March 2024).

Leave Your Comment